Computer Components

• SFF 8087 to 4 sata breakout cable, sas cable to sata, host side internal mini sas 36 pin male connect to motherboard or sas raid controller, SATA breakout cable connect to backplane or 4 HDD, sas to sata adapter provide secure internal connection between sas raid controller to sas driver cable, NOTE: Do not connect Mini sas connector SFF 8087 on your backplane, otherwise the mini sas to sata cable will not work with them
• Mini-sas to sata, sff-8087 port for connection to sas hba or pcie controller, mini sas 8087 sata with locking latch, internal mini sas to 4 x sata cable providing a reliable internal link between the serial mini sas controller to sata target, sff-8087 sas breakout cable data transfer rate up to 6Gbs per drive
• SFF8087 forward breakout cable, 8087 male sas connector for expand storage use, sas to sata cable are labled, simple up your cable management game, mini sas to sata female 7pin data transfer cable easy link serial scsi controller and sata connector
• SFF-8087 to 4x sata build with thin sas cable and tape/braid weaved design, length choice mini sas to sata short/sff-8087 breakout 0.5m and long sas breakout cable/mini sas to sata 3.3ft, breaided mini sas to 4 sata cable easy to route after installation, the sas to sata cable is the good choice for DIY and professional installers
• What you Get: Mini sas to sata cable (1.6FT/0.5M, 2xPCS) mini sas 36pin (SFF-8087) male to 4 sata 7pin female cable

• 1. Connect the HDMI source (such as DVD, PS3, STB) to the “HDMI IN” of transmitter by HDMI cable. 2: Connect the “HDMI out” of Receiver to display by HDMI cable.
• Connect the Transmitter and Receiver with one cat5e/6 cable (recommend). the furthest distance is 300M.(SET DIP number 1-4 must be dialed downward.)
• Plug the IR receiver to the RX, and IR transmitter to the TX. Aim at the equipment which needs to be controlled if you need the IR control function. Multi-point to Multi-point pairing: when multiple TX and multiple RX connect with switcher and Multi-point to Multi-point pairing requested, please setting by SET dip switch or pairing the IP extenders by Web browser setting.
• If the product is defective, or sent wrong or any problem,pls contact us timely for solution 5.Plug the mouse and keyboard into the USB port of the RX, and connect the USB port of the TX with the computer if you need the KVM control function.
• Connect two pieces of 5V power supply to the transmitter and receiver, and power on Now the PWN indicator of the units is lightened; when the status indicator twinkling,link indicator light up, means the units start successfully.

★【 Advantage 】:USB C header adapter Supports All Computer Motherboards with USB 3.0/ 3.1 19-pin header -(Blue or black socket).Not limited to operating system.

★【 Function】:USB 3.0 19Pin to Type-E 20Pin front panel adapter, the connection is stable.can be extended to PC front pannel USB-C ports.Connect any of your Type C interface devices.

★【Specificationr】: Signal Input–Motherboards USB3.0 IDC 19 PIN Male Connector.Signal Output– USB 3.1/3.2 Gen 2 Type-E Key A Ports Female Connector.

★【Parameter】: Supports data transfer with USB-C devices at speeds up to 5Gbps. Both sides can be inserted. The maximum voltage is 5V, the current is 0.9A, and the power is 4.5W. PD charging is not supported.

★【Craft】:The high-quality 4-layer PCB circuit design, stable signal, strong anti- interference ability.LED indicating working status, and good connector metal contacts make the product reach a stable working state.